Back Panel - GE VG4258 User Manual

References
Location of Controls

Back Panel

CH 3
Selects the channel to which you will tune
the TV to see the VCR picture if you
connect the VCR using one of the basic
hookups.
IN FROM ANT. (Antenna) Connector
Receives the signal from an antenna or
cable system that is attached to this
connector.
OUT TO TV Connector
Passes signal to TV using the cable
supplied.
CH
5 6
3 4
5 5 6 6
4 Switch
OUT IN
VIDEO
L
AUDIO
R
VIDEO and AUDIO R (Right) and L (Left)
IN Jacks
Receives signals from another component,
like a VCR or camcorder, when it is
connected to these jacks.
Use INPUT to select.
VIDEO and AUDIO R (Right) and L (Left)
OUT Jacks
Sends signals from VCR to another
component, like a TV monitor or VCR, when
it is connected to these jacks.
IN FROM
ANT.
OUT TO
TV
33