Tv Function Buttons - GE VG4258 User Manual

Using the Remote Control
Buttons
VCR Function Buttons
PAUSE
Pauses action for viewing during
playback.
Pauses recording to prevent
recording of unwanted scenes.
PLAY
Plays a tape.
PREV CH (Previous Channel)
Switches between two channels.
Select one channel and then select
another. Press PREV CH to
switch between the two channels.
Turns off VCR when remote is set
to control the VCR.

TV Function Buttons

Press the TV button to set remote to control a compatible TV. Some buttons may not work with the TV.
CHANNEL up or down
Selects next higher or lower
channel in the TVÕs channel
memory when remote is set to
control a TV.
CLEAR
Removes menus or status
displays from the screen.
DISPLAY
Shows the status displays on the
screen.
Removes menus or displays from
the screen.
MUTE
Turns the TV sound on or off.
12
(continued)
REC•OTR
Starts VCR recording.
Used for one touch recording.
See page 28.
REW. (Rewind)
Rewinds the tape when the VCR
is stopped.
Searches the picture in reverse
motion during playback.
SEARCH
Displays INDEX and GO-TO
SEARCH menus on TV.
Advances tape 60 or 120 seconds
during playback.
SLOW up or down
Used for slow-motion playback.
Numbers (0 through 9)
Select a channel up to 99 by
pressing two numbers.
You can also select a cable
channel over 99 by pressing and
holding 1 until 1– – appears on
the screen. Then press the other
two numbers.
OFF
Turns off a compatible TV when
remote is set to control that TV.
Used with TV button to turn on a
compatible TV (other than GE,
RCA, or ProScan) when remote is
programmed to control that TV.
See page 14.
SPEED (Tape Speed)
Selects a recording speed
(SP or SLP).
STOP
Stops the normal functions such
as record, playback, rewind, fast
forward, and pause of the VCR.
TRACKING up or down
Lets you manually reduce the
streaks that may appear on the
picture during play or pause.
Reduces picture ÒjitterÓ during
stop-action playback.
TV•VCR
Switches the picture signal so
that it either comes from the VCR
or the TV channel. See page 10.
PREV CH (Previous Channel)
Switches between two channels.
Select one channel and then select
another. Press PREV CH to
switch between the two channels.
VOLUME up or down
Raises and lowers sound of TV.