Cisco 2960-S Hardware Installation Manual page 39

Chapter 2 Switch Installation
Figure 2-7
A
B
Figure 2-8
and does not have redundant connections.
Figure 2-8
A
C
Figure 2-9
switch 3 are stack masters.
Figure 2-9
A
OL-19732-04
Stack with Half Bandwidth Connections
shows a stack with a bad FlexStack cable in link B. This stack provides only half bandwidth
Stack with a Failover Condition
B
shows a stack with a bad link B. This stack partitions into two stacks, and switch 1 and
Partitioned Stack with a Failover Condition
B
Catalyst 2960-S Switch Hardware Installation Guide
Planning a Switch Stack
2-9