Usb Type A Port; Sfp And Sfp+ Module Slots - Cisco 2960-S Hardware Installation Manual

Front Panel

USB Type A Port

The USB Type A interface provides access to external USB FLASH devices (also known as thumb drives
or USB keys).
The interface supports Cisco USB flash drives with capacities from 64 MB to 1 GB.
Cisco IOS software provides standard file system access to the flash device: read, write, erase, and copy,
as well as the ability to format the flash device with a FAT file system.
For more information about the switch management ports, see the switch software configuration guide
and the command reference on Cisco.com and the
page

SFP and SFP+ Module Slots

The switch has either two or four 1-Gigabit SFP or two 10-Gigabit SFP+ module slots. The slots marked
SFP+ support both SFP and SFP+ modules. The SFP slots support only the SFP modules.
shows a switch with the SFP+ slots.
Figure 1-6
1
Catalyst 2960-S Switch Hardware Installation Guide
1-8
B-1.
SFP+ Slots
47 X
48 X
1
1
SFP+ module slots
"Connector and Cable Specifications" section on
P o E 1 0
G
2
Chapter 1 Product Overview
Figure 1-6
OL-19732-04