Controlling The Far End Camera - Cisco TelePresence System Codec C40 Administrator's Manual

Cisco TelePresence System Codec C40/C60 and Profiles using C40/60
Contents

Controlling the far end camera

While in a call, you can control the remote participant's
camera (far end) provided that:
• The Conference FarEndControl Mode
On on the far end video system.
• The far end camera has pan, tilt or zoom functionality.
Only the relevant controls will appear.
D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013.
Introduction Web interface Web interface
Navigate to: Call Control
setting is switched
Far end camera control indicator
If this symbol is present, you can control
the remote participant's camera.
System settings
3. Use the left and right arrows to pan the camera; the up and
www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
25
Administrator Guide
Setting passwords Appendices
Control the remote participant's camera
1. Click the snapshot to show it in a larger window.
2. Place the cursor in the image to enable the controls.
down arrows to tilt it; and + and - to zoom in and out.