Cisco TelePresence System Codec C40 Administrator's Manual page 121

Cisco TelePresence System Codec C40/C60 and Profiles using C40/60
Contents
Video Output DVI [2] MonitorRole
The DVI monitor role describes which video stream will be shown on the monitor connected to
the video output DVI-I connector.
Requires user role: ADMIN
Value space: <Auto/First/Second/PresentationOnly/Recorder>
Auto: The system will detect when a monitor is connected and assign a monitor role to it.
The first monitor connected will be assigned monitor role First. In a multi-monitor setup the
next monitors will be assigned monitor role Second.
First/Second: Define the role of the monitor in a multi-monitor setup. In a single-monitor
setup, there is no difference between First and Second.
PresentationOnly: Show presentation video stream if active, and nothing else.
Recorder: Show all participants, including the local main video. If active, also show the
presentation.
Video Output DVI 2 MonitorRole: Auto
Example:
Video Output DVI [2] OverscanLevel
Some TVs or other monitors may not display the whole image sent out on the systems video
output, but cuts the outer parts of the image. In this case this setting can be used to let the
system not use the outer parts of video resolution. Both the video and the on-screen menu will
be scaled in this case.
Requires user role: ADMIN
Value space: <None/Medium/High>
None: The system will use all of the output resolution.
Medium: The system will not use the outer 3% of the output resolution.
High: The system will not use the outer 6% of the output resolution.
Video Output DVI 2 OverscanLevel: None
Example:
D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013.
Introduction Web interface System settings System settings
Video Output DVI [2] Resolution
Select the preferred resolution for the monitor connected to the video output DVI-I connector.
This will force the resolution on the monitor.
Requires user role: ADMIN
Value space: <Auto/640_480_60/800_600_60/1024_768_60/1280_1024_60/1280_720_50/
1280_720_60/1920_1080_50/1920_1080_60/1280_768_60/1360_768_60/1366_768_60/16
00_1200_60/1680_1050_60/1920_1200_60>
Auto: The system will automatically try to set the optimal resolution based on negotiation
with the connected monitor.
Range: 640x480@60p, 800x600@60p, 1024x768@60p, 1280x1024@60p, 1280x720@50p,
1280x720@60p, 1920x1080@50p, 1920x1080@60p, 1280x768@60p, 1360x768@60p,
1366x768@60p, 1600x1200@60p, 1680x1050@60p, 1920x1200@60p
Video Output DVI 2 Resolution: Auto
Example:
Video Output Composite [3] MonitorRole
NOTE: Applies only to Codec C60.
The Composite monitor role describes which video stream will be shown on the monitor
connected to the video output Composite connector.
Requires user role: ADMIN
Value space: <Auto/First/Second/PresentationOnly/Recorder>
Auto: The system will detect when a monitor is connected and assign a monitor role to it.
The first monitor connected will be assigned monitor role First. In a multi-monitor setup the
next monitors will be assigned monitor role Second.
First/Second: Define the role of the monitor in a multi-monitor setup. In a single-monitor
setup, there is no difference between First and Second.
PresentationOnly: Show presentation video stream if active, and nothing else.
Recorder: Show all participants, including the local main video. If active, also show the
presentation.
Video Output Composite 3 MonitorRole: Auto
Example:
www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
121
Administrator Guide
Setting passwords Appendices