Far-End Camera Control - Cisco TelePresence CE9.12 User Manual

Camera Control

Far-End Camera Control

1
Navigate to Participants in the upper right corner and press OK
on the remote control.
3
To control the far-end camera navigate to Camera (number two
from the right) and click OK on the remote control.
D15097.22 Cisco TelePresence SX10, SX20 User Guide APRIL 2020
All contents © 2020 Cisco Systems, Inc. All rights reserved
2
A menu showing a list of the participants in the call opens. Navigate to
the participant, whose camera you want to control and press OK on
the remote control. A submenu opens
.
4
Adjust Pan, Tilt, and Zoom as per your liking. Use OK or Back on the
remote control to exit.
About Far-End
Camera Control
Many video devices have a remotely
controllable camera. Such devices
allow you to use a remote control to
change pan, tilt, and zoom.
If the far-end (those you are in a
meeting with) have such a device,
you may be able to control their
camera during the call.
33