Cisco TelePresence System Codec C40 Administrator's Manual page 39

Cisco TelePresence System Codec C40/C60 and Profiles using C40/60
Contents
User administration, continued
Deactivating a user account
Follow these steps in order to deactivate a user account:
Always keep at least one user with ADMIN rights
Active.
1. Click the name of an existing user to open the Editing
user window.
2. Set the Status to Inactive.
3. Click Update User to save the changes.
Use the Back button to leave without making any
changes.
Deleting a user account
Follow these steps in order to delete a user account:
It is not possible to delete the default admin user.
There must always be at least one user with ADMIN
rights on the system.
1. Click the name of an existing user to open the Editing
user window.
2. Click Delete <user name>... and confirm when prompted.
D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013.
Introduction Web interface Web interface
Navigate to: Configuration > User Administration
System settings
www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
39
Administrator Guide
Setting passwords Appendices