Accessing The Usb Connector; Micro Sd Card; Installing A Micro Sd Card - Magellan eXplorist Pro 10 User Manual

Setup

Accessing the USB Connector

1. Using your fingernail at [B], open the USB Port
cover. When done, be sure to close the cover
firmly to prevent water or dirt from entering the
USB port. (Note that the USB connector is
angled up slightly.)

micro SD Card

A micro SD card can be installed in the Magellan eXplorist Pro 10 to store and retrieve data. Please see your
application instructions for details on how to save to or access data from the micro SD card.

Installing a micro SD Card

1. Remove the battery door and batteries.
2. Slide the silver micro SD card retaining plate towards
the top of the receiver.
3. Lift the retaining plate up with your fingernail.
4. Insert a micro SD card with the contacts down,
pointing towards the top of the receiver.
5. Close the retaining plate and slide towards the
bottom of the receiver, locking the micro SD card in
place.
6. Reinstall the batteries and replace the battery door.
Magellan eXplorist Pro 10 GPS Receiver
B
5