Precautions - Honeywell TC152 User Manual

intervals
• Press UP button selecting a desired time interval and press SET
confirming the setting
HIGH RAIN ALARM
The high rain alarm for the past 24 hours can be set and displayed at any
time by pressing ALARM button on the front panel.
To set the high rain alarm,
• Press the ALARM button on the front panel until the "ALARM HI"
will appear on the upper right corner of the rainfall information
line.
• Press and hold the ALARM button for 2 seconds or until the
rainfall data digits will flash.
• Enter the rainfall amount you want to set the rain alarm for using
the buttons or
• Press the ALARM button again to confirm and the high rain
alarm will be set

PRECAUTIONS

This product is engineered to give you years of satisfactory service if
handled carefully. Here are a few precautions:
• Do not immerse the units in water.
• Do not clean the units with abrasive or corrosive materials. They
may scratch the plastic parts and corrode the electronic circuits.
• Do not subject the product to excessive force, shock, dust,
temperature, or humidity, which may result in malfunctions,
shorter lifespan, damaged batteries, and damaged parts.
• Do not tamper with the units internal components. Doing so will
invalidate the warranty and may cause damage. These units
15
contain no user-serviceable parts.
• Use only fresh batteries. Do not mix new and old batteries.
• Read the user's manual thoroughly before operating the units.
16
15