Control Panel; Control Settings; The Display - GE GSD4410 Owner's Manual

About the dishwasher control panel.
You can locate your model number on the tub wall just inside the door.
Throughout this manual, features and appearance may vary from your model.
AUTO CHINA LO HI
POTS PANS SENSING SOIL LEVEL
NORMAL CLEAN
ADD RINSE AID LOCKED WASHING
TEMP WATER HEATED RINSING
ENERGYSAVER DRY AIR DRYING
1
8
LOAD SELECTION
POTS
NORMAL
PANS
HR.
RESET DELAY
2

Control Settings

The Display

1
This display tells you what is happening in the
dishwasher and can alert you to some possible
problems. It also remembers your last cycle so you don't
have to reprogram each time. See the About the display
section.
Information displayed:
LOAD SELECTION.
OPTIONS.
When the dishwasher is sensing the amount of soil in
the load.
Cycle phase, such as WASHING, RINSING or DRYING.
Diagnostic codes to alert you to possible problems.
Time remaining in the cycle will be displayed approx.
10–15 minutes after cycle has started.
The amount of soil in the load.
See the Know the display section for explanation of
displays and codes.
The Active Vent— The vent will close during washing to
retain heat and reduce noise. After washing it will open
to vent moisture and help the dishes dry faster.
ENERGY
CHINA RINSE
SAVER
CRYSTAL HOLD
DRY
OPTIONS
DELAY
RESET LOCK
START
3
START
4