Connecting The Truvision Nvr 40; Front Panel Connectors; Interface Module Connectors - GE TruVision NVR 40 User Manual

Connecting the TruVision NVR 40

Front panel connectors

Figure 7: NVR 40 front panel connectors
1. Power socket
2. Interface module
3. Keyboard and mouse
4. Power button
All connectors are located on the front panel of the chassis (see Figure 7 above). The
NVR 40 unit contains the following connectors:
• One keyboard connector (purple) and one mouse connector (green)
• Four high-speed USB 2.0 ports
• One VGA connector
• Two Ethernet ports (10/100/1000 Mbps)
• One On/Off button
• One power plug
• One interface module

Interface module connectors

The peripheral equipment can be connected either by using the front motherboard
connector or the interface I/O or serial port modules.
As far as the interface modules are concerned, pins are numbered from left to right
when facing the interface module.
TruVision NVR 40 User Manual
5. VGA
6. LEDs
7. USB ports
8. Ethernet ports
Connecting the TruVision NVR 40
13