Dmz - D-Link DSL-2750B User Manual

Section 3 - Configuration

DMZ

The DSL-2750B will forward IP packets from the WAN that do not belong to any of the applications configured in the Port Forwarding table to the
DMZ host computer
To access setting window, click on the DMZ button in the ADVANCED tab
DMZ
Since some applications are not compatible with NAT, the device supports
the use of a DMZ IP address for a single host on the LAN. This IP address is
not protected by NAT and it is visible to agents on the Internet with the
correct type of software. Note that any client PC in the DMZ is exposed to
various types of security risks. If you use the DMZ, take measures (such as
client-based virus protection) to protect the remaining client PCs on your
LAN from possible contamination through DMZ.
Click Apply to save the settings.
D-Link DSL-2750B User Manual 59