D-Link DSL-2750B User Manual page 44

Section 3 - Configuration
IPV6 LAN APPLICATIONS
Enable DHCPv6 Server
WIDE-DHCPv6 is an open-source implementation of dynamic host
configuration protocol for IPv6 (DHCPv6) originally developed by the
KAME project. The implementation mainly complies with the following
standards: RFC3315, RFC3319, RFC3633, RFC3646, RFC4075, RFC
4272 etc.
Enable RADVD: The router advertisement daemon (RADVD) is run by
Linux or BSD systems acting as IPv6 routers. It sends router
advertisement messages, specified by RFC2461, to a local Ethernet LAN
periodically and when requested by a node sending a router solicitation
message. These messages are required for IPv6 stateless
auto-configuration.
SITE PREFIX CONFIGURATION
Enable MLD Snooping: Multicast Listener Discovery Snooping (MLD
Snooping) is an IPv6 multicast constraining mechanism that runs on
Layer 2 devices to manage and control IPv6 multicast groups. By
analyzing received MLD messages, a Layer 2 device running MLD
Snooping establishes mappings between ports and multicast MAC
addresses and forwards IPv6 multicast data based on these mappings.
After finishing setting, click the Save/Apply button to apply the settings.
D-Link DSL-2750B User Manual 44