D-Link DSL-2750B User Manual page 50

Section 3 - Configuration
(ms). Default (100) is recommended.
Adjust the Transmit Power here. This tool can be helpful for security
purposes if you wish to limit the transmission range.
Select whether WMM is enable or disabled. Before you disable WMM, you
should understand that all QoS queues or traffic classes relate to wireless
do not take effects.
SSID
Select Enable Wireles to turn Wi-Fi on and off.
The Wireless Network Name (SSID) is a unique name that identifies a
network. All devices on a network must share the same wireless network
name in order to communicate on the network. If you decide to change the
wireless network name from the default setting, enter your new wireless
network name in this field.
Visibility Status selects Visible can be found by wireless clients,
Invisible to hide your wireless network
Select the User Isolation be ON so that users connect to the same
access point cannot connect to each other's device via the access point.
Enable Disable WMM Advertise, the transmission performance
multimedia of the voice and video data can be improved.
Enable Enable Wireless Multicast Forwarding (WMF), the transmission
quality of video service such as IPTV can be improved.
Clients exceed the value specified in the Max Clients will be refused to be
linked up with access point.
D-Link DSL-2750B User Manual 50