ClearSounds quattro 4 User Manual page 23

Getting Started
To break a Bluetooth connection (aka Disconnect):
1. Turn the Bluetooth device off.
when you turn it back on and the device is still within the 33 foot range,
the Quattro 4.0 will find it & connect.
2. Turn off Bluetooth in the settings of the Bluetooth device.
instructions in the Bluetooth device User's Guide, if necessary). This
allows you to break the connection while leaving your device on. When
you are ready to re-connect, on the device, turn Bluetooth back on.
Once Bluetooth is turned on, the Quattro 4.0 will automatically find &
connect when it comes within 30 feet of the device.
NOTE: If the Quattro 4.0 is moved outside of the Bluetooth connection range
(which is approx. 33 feet), you will hear "out of range" announced. The
screen will revert back to its standby interface. If two devices have been
connected and one of them falls out of range, the screen will refresh
and only display the remaining connected device's name.
This breaks the connection, however
(Follow the
21