ClearSounds quattro 4 User Manual page 15

Engagement + / -
Battery Engage Switches:
mic and the Base. This switch MUST be in the
the unit to function. By switching to the
the circuit. This switch does NOT need to be put in the
to protect the integrity of the battery when stored in the warehouse.
Charging Dimples:
pegs (see page 11) are placed when the mic is attached
to the base. The mic must be attached when charging
the unit in order for the mic batteries to charge.
There is a battery engage switch on both the removable
–
position, the battery is disengaged from
These holes are where the charging
+
position on both the Mic & Base for
–
position. The purpose is
13