Page 2
User Manual carefully in order to get the very best results from your CLA7v2. This will tell you how to set up the CLA7v2 correctly and explain all the features to you. 2 – ENGLISH...
Keep the manual for easy reference. please visit our web site at www.clearsounds.com • Register your product • Download additional manuals and trouble shooting tips PLEASE SAVE THESE INSTRUCTIONS CONdITIONS fOR USE IMPORTANT SAFETY INSTRUCTIONS Read and understand the Installation Guide & User Manual. When...
electrical storm present your immediate area, possibility electrical shock still exists. WARNING: Do not use the product if you suspect a gas leak in the area. The product’s electrical contacts could create a spark, which could ignite any heavy concentration of leaking gas. fEATURES &...
Page 5
NOTE: please check that your telephone equipment is UL/ETL approved before connecting the ClearSounds CLA7v2 into the headset jack. please refer to your owners manual or contact the telephone manufacturer. 5 – ENGLISH...
Installing the Batteries IMPORTANT: The CLA7v2 needs to be disconnected from the telephone before installing the batteries. open the battery compartment door located on the back of your CLA7v2 by pulling back the latch. Insert correctly alkaline batteries (included) in the battery compartment.
Depending on the type of device you are connecting to, select the proper connectivity cord and connect the CLA7v2 end to the base of the CLA7v2 unit and the other end into the 2.5mm or 3.5mm jack on the device you are using.
Page 8
USING YOUR CONNECTIVITY CORdS Your CLA7v2 comes with 4 connectivity cords. That are connected to the bottom of the CLA7v2 using the Connectivity Jack as shown in the features diagram. 8 – ENGLISH...
Page 9
Cord Use With Benefits 3.5mm to • Cordless Allows hands 2.5mm phones free connections Mono with cordless • Cell phones Handsfree phones, corded • Certain phones, and Corded cellular phones phones that have Mono 2.5mm jacks for 2 way conversations using the neckloop’s microphone.
Page 10
TTY requirement of the Americans with Disabilities Act and use the CLA7v2’s 2.5mm Mono Connectivity Cord. The CLA7v2 can work with cell phones that have stereo music capabilities. Use the connectivity cord that has the 2.5mm stereo connector on...
2. Battery may be in backwards. 3. Verify that the CLA7v2 is turned on. 4. Verify that the phone is turned on. 5. Check if the plug of the CLA7v2 is plugged all the way in. Weak Sound 1. Weak battery.
Page 12
Keep the unit out of the reach of small children. If the CLA7v2 is not in use do not store the CLA7v2 with batteries installed for an extended length of time. Store your CLA7v2 in a dry place. Do not expose your CLA7v2 to excessive moisture, humidity or steam.
SPECIfICATIONS Maximum Gain: • 30dB in Wide Band (300 to 3400 Hz) • Up to 30dB with full cellular volume or other type device at full volume. dimensions: • Base Size: 78mm x 44.5mm x 20.5mm • Weight: 54.8 g with batteries Power Requirements: •...
LIMITEd ONE-YEAR WARRANTY The neckloop is warranted by ClearSounds against manufacturing defect in material and workmanship under normal use for one (1) year from the date of purchase. Connectivity Cords are warranted by ClearSounds against manufacturing defect material workmanship for a period of ninety (90) days.
Page 15
Acts of God or failure in your phone service carrier’s line service. The product must not be tampered with or taken apart by anyone who is not an authorized ClearSounds Communication representative. ® Tampering with the phone will void any written or implied warranties.
Page 16
Service in United States Service in CANAdA ClearSounds Communications ClearSounds Canada Attention: Repair Center 1743 Quincy Avenue, Suite 155 Naperville, IL 60540 800-965-9043 Check our website www.clearsounds.com for additional information and to download additional manuals and information. 16 – ENGLISH...