Flexstack-Plus Ports And Leds - Cisco Catalyst 2960X-48FPD-L Hardware Installation Manual

Product Overview
1
2
3

FlexStack-Plus Ports and LEDs

The stacking-capable switch models support stacking with the optional stack kit. It has the FlexStack-Plus
module (hot-swappable) that inserts in the slot located in the switch rear panel, and a 0.5-meter FlexStack
cable to connect the FlexStack-Plus module ports.
Figure 9: FlexStack-Plus Module
1
2
This table lists the FlexStack-Plus module LED colors and their meanings.
Table 11: FlexStack-Plus Module LEDs
Color
Green
Off
Table 12: Stack Configurations
Switch
Stack with Catalyst 2960-X
stack-capable switches
OL-28309-02
FlexStack-Plus module slot and cover
Power supply slot (with blank module)
AC OK LED
FlexStack-Plus module
LED for Stack port 1
Description
Port is active, cable is attached.
The port is not active, no cable is attached.
4 PS OK LED
5 AC power connector on the power supply module
3 LED for Stack port 2
Number of Switches in the Stack
8
Catalyst 2960-X and 2960-XR Switch Hardware Installation Guide
FlexStack-Plus Ports and LEDs
Bandwidth
80 G
17