Connect; Connect The Phone From A Flat Surface; Hang And Connect The Phone - ClearSounds CSC600 User Manual

Connect

Connect the phone from a flat surface

To place your phone on a flat surface, follow the steps in
this section.
Note: For optimal speakerphone sound, do not
place the phone in noisy or recessed areas or on
surfaces affected by vibration.
1.
Connect
connect it to on the left side of the
2. Connect
phone base, and then connect it to
3. Connect to
phone base, and then connect it to an AC power
outlet in the wall.
Note: is required for the phone to function
properly.

Hang and connect the phone

To hang your phone from a wall, follow the steps in
this section.
12
to on the , and then
.
to on the back of the
in the wall.
on the back of the
To prepare the phone for hanging
1.
Reposition this tab, so that it holds the handset
when the phone hangs on the wall:
Tab
a. Push and slide up
b. Rotate 180 degrees to
slide it back into the slot.
To hang the phone on the wall
You can hang the phone in one of these ways:
• Over a phone jack (the phone line cord is hidden)
• Anywhere on the wall (the phone line cord
extends to the nearest wall jack)
To hang the phone over a phone jack
If a phone jack wall plate with mounts is installed on
your wall, you can use the ClearSounds wall mount
bracket to hang the phone over the jack on the wall.
1. Connect
phone base.
out of the slot.
, and then
to on the back of the
13