Lowrance HDS-5 Operation Manual page 75

Trails
Controls the way trails are logged (updated). Trails mark your movement as you
travel, placing points along your path using one
of three logging types: Time, Distance or Auto.
You can save up to 10 trails with up to 9,999
points per trail. If a trail exceeds 9,999 points,
each new point will overwrite a point at the
beginning of the trail.
Logging Type
Controls the method used for updating a trail. Trails can be updated using Time,
Distance or the default automatic setting.
Time
A point is placed along the trail after a selected amount of time
A point is placed along the trail after you travel a selected
Distance
distance
Auto
A point is placed along the trail every time you change direction
To select a Logging Type:
1. Highlight Logging Type on the Trails menu and press enTeR.
2. Use the keypad to select Auto, Distance or Time and press enTeR.
Distance Period
Controls how far you will travel before a point is placed along the trail.
To set Distance period:
1. Highlight Distance Period and press
enTeR.
keypad will appear.
2. Input the desired distance and se-
lect OK. Press enTeR.
Logging Types
The distance period
Distance Period set to 1nm
73
Settings
Trails Menu