Lowrance HDS-5 Operation Manual page 114

Settings
Route
Allows you to select a route to be used during a simulation.
To select a route:
1. Select Route from the Advanced menu and press enTeR. A Route
List will appear.
2. Use the keypad to select the desired route and press enTeR.
Set Start Position
Sets the starting point of a GPS Simulation to the cursor position.
To set start position:
1. Move the cursor into the desired position and access Simulator
advanced menu.
2. Highlight Set Start Position and press enTeR.
3. Select the Set button and press enTeR.
4. Highlight Save and press enTeR.
Restore Defaults
Switches Advanced simulator options back to defaults settings. To restore defaults,
select Restore Defaults from the Advanced menu and press enTeR.
112