Lowrance HDS-5 Operation Manual page 21

To add source:
1. Select Add Source from the Edit Info menu
and press enTeR.
2. Use the keypad to select the desired category
and press enTeR. A list of subcategories will
appear.
3. Select the desired subcategory and press
enTeR.
To remove a source:
1. Highlight Remove Source from the Edit Info menu and press enTeR.
The Remove data-source window will appear.
2. Select the source you want to remove and press enTeR.
To Configure Limits:
1. Highlight Configure Limits on the Edit Info menu
and press enTeR. The Configure Limits menu
will appear.
2. Select the desired text box and press enTeR.
3. Use the keypad to enter the desired limit or
warning threshold.
4. Select OK and press enTeR.
NOTE: The Limits portion of the Configure Limits menu will
only be shown when configuring analog gauge limits.
19
Pages