Table of Contents
Advertisement
Controls and Features (continued)
Rear Side/Right Side/Bottom Surface
1
Connection Panel
Access panel by removing four screws and removing
side panel.
2
Lamp Cover
Remove this cover when replacing the lamp.
See manual insert for details on accessing bulb.
3
Exhaust Vent
Warm air is expelled through this vent to keep the
system cool. Do not block the exhaust vents.
Metal around vent is hot - DO NOT TOUCH while unit
is in operation
4
Remote Sensor (Rear)
When operating with the remote control, aim it towards
this sensor. ( Page 17)
● A remote sensor is also located at the front of the
unit.
8
3
4
2
1
Bottom Surface
5
Front Adjustable Foot (for adjusting height and
angle)
It is set at the lowest position when shipped from the
factory.
The foot can be adjusted to a maximum angle of +6°
and a maximum length of 31 mm. ( Page 14)
6
Filter
Cleans air drawn in from the air inlet.
Please clean this filter regularly. (
7
Rear Fixed Foot
5
6
6
7
Blocked as it is not in use.
Opening it forcibly will cause
damage to the unit.
Page 31)
Advertisement
Table of Contents
