Loading Batteries Into The Remote Control - Meridian DILA1080pHD Installation And Operation Manual

Loading Batteries into the Remote Control

Load batteries into the remote control. If the remote control starts to function erratically, replace the batteries.
1
Open the back cover
Press the back cover slightly and slide it in the direction of
the arrow.
2
Load the batteries
Insert the 2 (AAA) batteries supplied according to the
marks. To prevent short circuit, be sure to insert the
(minus) end of the battery first.
3
Close the back cover
Slide in the direction of the arrow to close the back cover.
Precautions for Using Batteries
If batteries are incorrectly used, they may crack or leak. This
could cause fire, burn, malfunction, and staining or damag-
ing of the surroundings.
Beware of the following:
• Do not mix new and old batteries.
• Do not mix different type of batteries as they are different in
characteristics.
• Insert batteries according to the
• Be sure to insert the minus end in first to prevent short circuit.
• Do not put batteries into fire or recharge them.
• Use only designated batteries.
• Remove the batteries if the remote control is not to be used for a
prolonged period.
Battery Life
Batteries last for 6 months to 1 year under normal use. However,
batteries provided are for confirming operation and may not last
,
that long. When the remote control fails to operate properly, re-
place the batteries with new ones.
Battery Leakage
When the batteries are totally exhausted and can no longer be
used, replace them immediately.
Leaving the batteries in the battery compartment causes leakage,
which may in turn lead to malfunction.
In cases where the leakage comes to contact with the skin, wipe it
away with a cloth. Otherwise, skin problems may occur.
marks on the battery case.
13