Receiving Alarms On The Telephone - Bosch Carephone 10 User Manual

Carephone 10
3

Receiving Alarms on the Telephone

Most alarms are sent directly to an Alarm Monitoring Centre. This is normally the safest way,
since an Alarm Monitoring Centre is in use 24 hours a day. But it is also possible to send
alarms, for example, to a relative. To receive alarms, all you need is a tone dialing telephone
(with * and # buttons).
To receive alarms, act as follows:
1 When you answer the call, you'll hear a beep from the Carephone every other second.
Acknowledge the alarm by pressing [4] on your telephone.
2A In case of assistance alarm, a speech connection is opened, and you can speak directly
with the person who issued the alarm.
Control the direction of the speech by pressing [7] to listen and [8] to speak (if the
Carephone is equipped with a duplex unit, this is done automatically). The Carephone
automatically terminates the call 3 minutes after the last time you pressed a button. By
pressing [4], you prolong the call by an extra 3 minutes.
2B In case of a technical alarm without a speech connection, the Carephone indicates the
alarm type by a beeping sequence (see below).
Number of beeps
1
2
4
5
3 If you would like to control the Carephone's output (additional feature), just press [9].
4 End by pressing [0] and thereafter, hang up.
Bosch Security Systems
Alarm type
radio battery
central unit battery
power failure
power normal
User Manual
Receiving Alarms on the Telephone | en
953.43d | v2.0 | 2009.01
9