Table of Contents
Advertisement
12
en | Functions
6
Functions
6.1
Issue an alarm
An assistance alarm is issued by pressing the red ALARM button on the Carephone or by
pressing your Wristband Transmitter.
When an alarm is active, the LED indicator blinks red and the Carephone beeps. After a pre-
alarm time of 10 seconds, the Carephone dials up an Alarm Monitoring Centre. When a
connection is established, the LED indicator turns to a steady red and you are now able to
speak directly to the operator of the Alarm Monitoring Centre. Explain what you want, and the
operator of the Alarm Monitoring Centre will help you.
When the operator of the Alarm Monitoring Centre has handled your alarm, your Carephone
goes back into normal mode and the LED indicator turns green.
If the Carephone has failed to contact the Alarm Monitoring Centre, it automatically tries again
until it has succeeded. If your telephone is in use when an alarm is issued, the telephone is
automatically cut off and the alarm has first priority (this is only valid if your Carephone is
connected before your first telephone).
6.2
Cancel an alarm
If by mistake you activate an alarm, you can cancel it by pressing the STOP button. Some
automatic alarms can't be cancelled, e.g. battery alarms.
6.3
Telephone line monitoring
Your Carephone automatically monitors your telephone line. If an error occurs on the line, the
Carephone beeps every other second, and the LED indicator slowly blinks red until the error
has been eliminated.
The beep can be silenced by pressing the STOP button on your Carephone.
6.4
Power failure
If a power failure should occur, the internal battery is automatically activated, and your
Carephone continues to work properly for up to 5 days. When a power failure occurs, the
Carephone beeps continuously for 10 seconds, and the LED indicator starts to blink red
(short blink).
When a power failure lasts more than 1 hour, an alarm is activated. If this occurs, a message is
also issued when the power returns to normal. When about 20% of the battery's capacity
remains an alarm is activated that states that the battery is weak.
When the power returns to normal, the battery is being recharged. After a long power failure,
it can take up to 24 hours for the battery to regain full charge.
6.5
Panic alarm
Your Wristband Transmitter can also function as a panic alarm (radio unit 3). Panic alarm means
that the Carephone is totally quiet when an alarm is issued, and the Alarm Monitoring Center
can only listen to what's happening through your Carephone.
953.43d | v2.0 | 2009.01
User Manual
Carephone 10
Bosch Security Systems
Advertisement
Table of Contents
