Dometic RM1350 User Manual page 9

adjUSting thE SizE of cUbES
If the ice maker was cleaned and drained, no ice cubes
will be dumped into the bin during the first cycle.
The first few cycles may have small cubes due to air trapped
in the water lines. The first container of ice cubes should be
dumped if the water system has been winterized or not used
for several weeks. Once the ice maker has run through several
cycles and if cubes are to small or sticking together, adjustment
is necessary on the amount of water entering the mold.
TO aDjusT ThE sIzE OF CuBEs, FOLLOw ThEsE sTEPs:
1. Remove the protective cover from the ice maker
mechanism.
2. Locate the adjusting screw under the protective
cover. Turn the screw counterclockwise to increase
the size of cubes.
Cover
3. Turn the screw clockwise to decrease the cube size
or if the mold is overfilling, and the cubes are stuck
together.
To prevent overfilling, do not turn the adjustment
screw more than one revolution at a time. allow
the ice maker to cycle several times before another
adjustment is made. Be sure to replace the protective
cover on the cycle after the adjustments are com-
plete.
oPERating inStRUctionS
Adjusting screw
WatER diSPEnSER
Rm1350Wim

TO DIsPENsE waTER, FOLLOw ThEsE sTEPs:
1. Verify that the water valve supplying the refrigerator
is turned on.
2. Insert a glass in the dispensing cavity and simply
press the lever. This will activate a switch which turns
on an electric water valve at the back of the refrigera-
tor. water will flow through a separate tube and out of
the dispenser.
3. To stop dispensing, pull glass away from dispensing
arm before the glass is full.
If new installation, or used infrequently, dispense
numerous glasses of water before use. To keep the
water fresh, it is recommended to use the dispenser
every day.
tURning off thE REfRigERatoR
The refrigerator may be shut off while in any mode of opera-
tion by pressing the ON/OFF button. This shuts off all DC
power to the refrigerator, including the interior light.
If the refrigerator will not be in operation for a period of weeks,
it should be emptied, defrosted, cleaned and the doors left ajar.
The ice trays should also be dried and kept outside the cabinet.
-  -
Press
lever