Special Key Functions - Bosch Carephone 62 User Manual

Carephone 62
6.2.5

Special key functions

Restore the programming steps to the factory settings
–
–
The unit is now ready for language selection.
CAUTION!
This function deletes all user settings and restores the factory
settings instead!
Reset the Carephone 62
–
The unit emits a beep and the unit reboots.
Easy wireless transmitter registering on the keyboard
–
–
–
–
The code number of the wireless transmitter is registered in
Selection 91 (erasing the previous code number).
NOTICE!
If you try to register again a wireless transmitter with the same
code number, the Carephone 62 announces "failure".
Easy wireless transmitter registering with top-cover installed
–
–
–
–
–
–
The code number of the wireless transmitter is registered in
Selection 91 (erasing the previous code number).
Bosch Security Systems
Press P and R together for at least two seconds.
The unit announces: "Setup reset".
Press R for at least one second.
Press P, 9 and 1 together for at least two seconds.
The unit waits for a wireless signal.
Press the button of the wireless transmitter.
Press C to confirm.
Press buttons <Yellow> <Green> together for at least two
seconds.
The unit waits for a wireless signal.
Press the button of the wireless transmitter.
The unit acknowledges with a beep.
Press the button of the same transmitter to confirm.
The unit acknowledges with two beeps.
User Manual
Programming | en
F.01U.141.162 | V3 | 2012.11
29