46
Reset tare to zero
���������������
��������������
�������������������
������������������
����������
���������������������������
���������������
�������������������
������
4780
�������������������
������������������
����������
���������������������������
���������������
�������������������
����������������
�������������������
����
������
�����������������
������������������
�����
������������
������
4781
������
Procedure for use
For machines with weighing equipment installed only!
Press b once to high-
light "RESET TARE TO
ZERO".
Press SELECT.
This screen shows that the
stored tare parameter has
been cleared.
Press SELECT.
Reset tare to zero
If your attempt to clear the tare parameter fails at this
point, you will see an error message equivalent to:
"FAILED. PRESS SELECT" on the display. For trou-
bleshooting, see the section "Fault-finding, weighing
equipment" in the machine manual.