16
To change parameters in the current program step
������������������
��������������������������
�
����������
��� ���
����������������
���� ��
�������������������
�� ��
���������������
�� ���
�����������
���� ���
�����������
�������������
������
584
�������������������
��������������������������
�
����������
��� ���
����������������
���� ��
�������������������
�� ��
���������������
�� ���
�����������
���� ���
�����������
�������������
������
������
�
�
�
������
Procedure for use
During program operation the
display will look like this (see
section "To start the wash
program").
Press c one or more
times...
...to highlight the line re-
quired.
Press SELECT.
�
�
�
�
Use the numeric keys to
enter the new parameter .
�
�
�
Press SELECT.
You can alter the following program steps:
Prewash, Main wash, Rinse, Drain, Soak
Length of program step (max. 9998 seconds),
heating temperature (max. 97°C).
Extraction
Length of program step (max. 599seconds),
extraction speed.
If you have entered the wrong parameter
Continue pressing numeric keys to overstrike the
incorrect parameter.
Note: always use the same number of digits as
used on the display to overstrike the incorrect
parameter.
Example:
To change the time for the program step to 30 se-
conds, enter 030 to overstrike the earlier parameter.