General Characteristics; Electrical Characteristics; Environment; Physical Characteristics - Metrologic ScanPal 2 User Manual

2.

General characteristics

The basic characteristics of the ScanPall2 are as follows:

Electrical characteristics

Main battery................................ two AAA replaceable batteries or one Ni-MH
Backup battery............................ 3.0 V, 7.0 mAh rechargeable lithium battery,
Stand-alone operation ................ over 100 hours and over 50,000 reads (CPU

Environment

Humidity (operating) ................... non-condensing from 10% to 90%
Humidity (storage) ...................... non-condensing from 5% to 95%
Temperature (operating) ............. from -20 C to 60 C (-4 F to 140 F)
Temperature (storage) ................ from -30 C to 70 C (-22 F to 158 F)
EMC regulations ......................... FCC class A, CE and C-Tick approved
(EMC: Electromagnetic compatibility)
Shock resistance ........................ 1.2 m (4') drop on to concrete

Physical characteristics

Dimensions................................. 145 mm (5.7") L x 63 mm (2.5") W x 33.5
Weight ........................................ 180 g (6.3 oz) including batteries
Color........................................... dark grey
Material....................................... ABS (Acrylonitrile Butadiene Styrene)

CPU

Toshiba 16-bit CMOS microprocessor
rechargeable battery
for the static random access memory
(SRAM) and the calendar
in low-speed mode and 1 read every 5
seconds)
(FCC: Federal Communications Commission)
mm (1.3") H