Metrologic ScanPal 2 User Manual page 23

Speed
Defines the CPU operating speed. Five speeds are available:
Speed
Full ......................... 39 mA
1/2.......................... 22 mA
1/4.......................... 12 mA
1/8............................ 7 mA
1/16.......................... 5 mA
The consumptions are given for normal operation, with no scanner
reading or data transmission.
If the full-speed mode is not necessary, choose the lowest speed, in
order to save the batteries.
Default value: Full speed.
Auto Off
Defines the time beyond which power down is automatic, when no
operation has been performed during this time period. If this value is
equal to zero, the function is de-activated.
Default value: 10 minutes.
Power On
Two possible selections:
Program Resume, which starts the program from the last session used
before power down; or Program Restart, which restarts the program from
the beginning.
Default value: Program Resume.
Key Click
Enables or Disables the issuing of a sound when a key is pressed.
Default value: Enable.
Consumption