Metrologic ScanPal 2 User Manual page 18

2. Upload data
Uploads the data collected, via the selected upload port.
The letter displayed on the screen, at the right of the Upload Data line,
indicates the selected upload port: RS232 (R) , IR (T), IrDA (I) or Wedge (K).
On the PC (under Windows), to receive the data and create a text file, use the
application generator, 232_Read.EXE or IR_Read.EXE.
For further information, refer to the application generator user manual.
3. Utilities
System settings
- Set Upload Port
Defines the data upload port: RS232 (cable or download cradle), IR
(high-speed infrared transceiver), standard IrDA infrared or
screen/keyboard Wedge.
The letter displayed on the screen, at the right of the Set Upload
Port line, indicates the selected upload port: RS232 (R), IR (T), IrDA
(I) or Wedge (K).
Default value: RS232.
- Set Download Port
Defines the port for downloading an application or a file: RS232
(cable or download cradle), IR (high-speed infrared transceiver) or
standard IrDA infrared.
The letter displayed on the screen, at the right of the Set Download
Port line, indicates the selected download port: RS232 (R), IR (T) or
IrDA (I).
Default value: RS232.
- Transmission Speed
Defines the transmission speed, up to 115,200 bps.
Default value: 115,200 bps.
- LCD Backlight
Defines the duration of the backlighting.
Default value: 20 seconds.