Kernel Mode - Metrologic ScanPal 2 User Manual

Kernel Mode

Turn off the ScanPall2, and then simultaneously press the
and keys to enter System mode; next turn off the ScanPall2, and then
1
STU
simultaneously press the
Kernel mode offers the following operations:
1. Program Download
Downloads a user program (*.SHX) into the ScanPall2.
The download procedure is identical to that described in System mode (refer
to section 5.3, Download).
2. Update Kernel
Updates the system kernel. Updating the kernel is sometimes necessary in
order to improve the system performance, or for some other reason. This
function guarantees that the latest version of the kernel is being used. The
procedure for updating the kernel (KSP2-xxx.SHX) is identical to that for
downloading a user program.
Be careful: after updating the kernel, wait until the system has completely
restarted before powering down the ScanPall2.
3. Test & Calibrate
This function is intended solely for performing various tests, diagnostics and
calibrations in the factory. Do not use.
7
ABC
,
Kernel Menu
1 Program Download
2 Update Kernel
3 Test & Calibrate
4 Version
7
ABC
and keys to enter Kernel mode.
,
9
GHI