Table of Contents
Advertisement
6.12 Cleaning the LED print head
Note
The cleaning process for the LED print head is usually carried out automatically after
a certain number of pages has been printed. The number of pages is set by service.
In rare cases LED print head cleaning may have to be started manually.
Caution
When cleaning the LED print head, please also observe the other safety directives in
section 6 Cleaning the printing system >>> page 175.
Proceed as follows:
Important
You can only carry out LED print head cleaning when in the "Stop" or "Operator
intervention necessary" status.
1.
If the printing system has not yet stopped, click the following button:
2.
Select the <Special functions> <Clean LED print head> menu on the operator panel.
3.
Click the following button to start LED print head cleaning:
LED print head cleaning is started.
Information on the icons displayed on the operator panel under "Worksteps":
see section Icons, page 93
4.
Click the following button on the operator panel to complete LED print head cleaning:
The printing system remains in the "Stop" status.
A29246-X20-X-4-7680 / fa605.fm
6.12 Cleaning the LED print head
1 of 2
219
Advertisement
Table of Contents
