Solving Stack Problems; Setting Paddle Force And Paper Pressure - Oce VarioPrint 5000 Operating Manual

5.6.6 Solving stack problems

5.6.6 Solving stack problems
This section contains information on the following topics:
5.6.6.1 Setting paddle force and paper pressure >>> page 108
5.6.6.2 Setting down pressure >>> page 109

5.6.6.1 Setting paddle force and paper pressure

A low paddle force reduces the tendency to vibrate and usually improves stacking
performance.
If there are any problems, you should perform tests to identify the most suitable setting.
• Low force: Values A to D
• Standard setting: D
• High force: Values E to H
Proceed as follows:
1. Press <Stop> button.
2. Open the left door.
3.
4. Close the left door.
5. Press the <Ready> button.
108
Turn the knob until the required value
is visible in the window.
A29246-X17-X-4-7680 / do501.fm