Table of Contents
Advertisement
A R M I N G S T A Y : P R O T E C T I N G Y O U R S E L F AT H O M E
Arming in the Stay mode allows you to remain home with the perimeter protection active but with the interior protection off,
so that you may move freely within the premises.
1
Check the Touchpad indicators. The green
dow will read "SYSTEM READY", indicating that the system is ready to arm.
SYSTEM READY
2
Press the STAY button.
The Touchpad will voice prompt the correct action.
STAY
3
The LCD window will read "ARMING STAY MODE" during the exit delay time period.
4
After the exit delay time period, the system will arm in Stay mode.
Note: To avoid the exit delay time period and arm Stay immediately,
To disarm, see page 17.
8
• If the green STATUS light is off and zones are scrolling in the display, a perimeter zone is faulted or a monitored
deadbolt (other than your exit door) is unlocked (if the primary exit door is unlocked, the LCD window will read
"DOOR UNLOCKED"). Check the open zones listed and close the door, window, or lock the deadbolts as needed. If
you cannot immediately secure the zones or lock the deadbolts, they may be bypassed (see page 12).
• If you change your mind after pressing STAY, press RESET to clear arming.
press and hold STAY for 2 seconds.
light must be ON-STEADY, and the LCD win-
STATUS
"System is arming
in Stay mode"
"System armed
Stay"
Advertisement
Table of Contents
