Monochrome; Film Mode; Range Of Opc - Sharp AQUOS LC-42PD7X Operation Manual

Aquos
Table of Contents

Advertisement

Basic adjustment settings (Analogue/Digital)

Monochrome

For viewing images in monochrome.
Press MENU and the MENU screen displays.
1
Press c / d to select "Picture".
2
Press a / b to select "Advanced", and then
3
press ENTER.
Press a / b to select "Monochrome", and then
4
press ENTER.
Press c / d to select "On", and then press
5
ENTER.

Film Mode

Automatically detects a fi lm-based source (originally
encoded at 24/25 frames/second, depending on the
vertical frequency), analyses it then recreates each still
fi lm frame for high-defi nition picture quality.
Repeat steps 1 to 3 in Monochrome.
1
Press a / b to select "Film Mode", and then
2
press ENTER.
Press c / d to select "On", and then press
3
ENTER.
NOTE
• Film Mode is not selectable depending on the input signal
type.

Range of OPC

The brightness level range of the OPC sensor's
automatic adjustments can be set according to your
preferences. The adjustment range of the OPC sensor
can be set to a maximum of +16 and a minimum of
-16.
Repeat steps 1 to 3 in Monochrome.
1
Press a / b to select "Range of OPC", and
2
then press ENTER.
Press a / b to select "Max." or "Min.", and
3
then adjust the item to the desired position.
Selected item
Max.
-15 through +16
Min.
-16 through +15
NOTE
• This function is available only when the OPC setting is set
to On.
• The maximum setting cannot be set to a smaller number
than the minimum setting.
• The minimum setting cannot be set to a bigger number
than the maximum setting.
• The maximum and minimum settings cannot be set to the
same number.
• Depending on the brightness of the surrounding light, the
OPC sensor might not operate if the adjustment range is
small.
Description
29

Advertisement

Table of Contents
loading

Table of Contents