Advanced Picture Adjustments; Color Temperature; Black; Lip Setting - Sharp Aquos LC-32D43U Operation Manual

Basic adjustment settings
Normal viewing mode
• "Film Mode" does not function when you set:
- the "AV Mode" to "Game" or
- the "liP Setting" to "Fast".
Provides high quality images with minimal dot crawl
and cross color noise.
Automatically detects a film-based source (originally
encoded at 24 frames/second), analyzes it then recreates
each still film frame for high-definition picture quality.
Press ..
IT
to select "Advanced", and then
press
ENTER.
Press MENU to display the MENU screen, and
then press
~/~
to select "Picture".
Press ..
IT
to select a specific adjustment
item, and then press
ENTER.
• You can select "Color Temp.", "Black", "liP
Setting", "Film Mode", "30- Y IC", "Monochrome",
or "Range of OPC".
Press ..
IT
(or
~/~)
to select the desired
parameter.
• See the table for the selectable parameters.
Press
MENU
to exit.
This TV provides various advanced functions for
optimizing the picture quality.
Slow For still images
Standard Normal adjustment
For a better white balance, use color temperature
correction.
For moving images
For Game Mode Off (2D)
Fast
• 30- Y
IC
is available for input signal from Composite Video
and analog broadcasts (air and cable).
t
White with Bluish tone
White with Reddish tone
High
Mid-High
Middle
Mid-Low
Low
@-
26
- 16 through
+
15
• The range of OPC settings are active only when the OPC is
set to On.
• The maximum setting cannot be set to a smaller number
than the minimum setting.
• The minimum setting cannot be set to a bigger number
than the maximum setting.
• Depending on the brightness of the surrounding light, the
OPC sensor might not operate if the adjustment range is
small.
For viewing a video in monochrome.
The brightness level range of the OPC sensor's automatic
adjustments can be set according to your preferences.
The adjustment range of the OPC sensor can be set to a
maximum of
+
16 and a minimum of - 16.
Suitable for smooth images with low
amounts of flickers
• "liP Setting" is not selectable when channel display shows
an input resolution of 480P, 720P, or 10801.
Converts input signals depending on the type of
images.
Changes the viewing depth by automatically adjusting
the dark portion of an image for easier viewing.