Wide Mode (For Tv/Av Input Mode) - Sharp AQUOS LC-42PD7X Operation Manual

Useful adjustment settings

WIDE mode (for TV/AV input mode)

WIDE MODE
Normal
Zoom 14:9
Panorama
Full
Cinema 16:9
Cinema 14:9
4:3 Mode set to "Panorama"
Selected item
Normal For 4:3 "standard" pictures. A side bar appears on each side.
For 14:9 letterbox pictures. A thin side bar appears on each side, and you may also see bars on the top and
Zoom 14:9
bottom with some programmes.
Panorama In this mode the picture is progressively stretched toward each side of the screen.
Full For 16:9 squeeze pictures.
Cinema 16:9 For 16:9 letterbox pictures. Bars may appear on the top and bottom with some programmes.
Cinema 14:9 For 14:9 letterbox pictures. Bars may appear on the top and bottom with some programmes.
Dot by Dot Displays an image with the same number of pixels on the screen (only when receiving 1080i/1080p signal).
Normal
Cinema 14:9
4:3 Mode set to "Normal"
Zoom 14:9
Cinema 16:9
Manual Selection
Press WIDE.
1
• The WIDE MODE menu displays.
• The menu lists the wide mode options selectable
for the type of video signal currently received.
Press WIDE or a / b while the WIDE MODE
2
menu displays on the screen.
• As you toggle down the options, each mode is
immediately refl ected on the TV.
Auto Selection
If you set "WSS" and "4:3 Mode" in the Setup menu
on page 43, the optimum WIDE mode is automatically
chosen for every broadcast containing the WSS
information.
"WSS" menu
To enable Auto Selection, set "WSS" in the Setup
menu to "On". (See page 43.)
"4:3 Mode" menu
To set the type of the wide screen, select "Panorama"
or "Normal" in the 4:3 Mode menu. (See page 43.)
NOTE
• If the broadcast signal contains no WSS information, Auto
Selection will not function even when the WSS option is
enabled.
Description
• Some screen sizes may not be
Panorama
Full
NOTE
displayable depending on the
input signal.
45