Advanced Picture Settings; Colour Temp; Film Mode; Black - Sharp LC-32G100H Operation Manual

Watching TV

Advanced picture settings

The advanced settings enable you to set the picture
adjustment in more detail. There are six options you
can choose from.
Press MENU and the MENU screen displays.
1
Press c / d to select "Picture".
2
Press a / b to select "Advanced", and then
3
press ENTER.
Press a / b to select the desired menu, and
4
then press ENTER.
Press a / b or c / d to select the desired level,
5
and then press ENTER if necessary.
w Colour Temp. (Colour Temperature)
Adjusts the colour temperature to give the best white
image.
Selected item
High
Mid-High
Middle
Mid-Low
Low
w Film Mode
Automatically detects a fi lm-based source (originally
encoded at 24/25 frames/second, depending on the
vertical frequency), analyses it then recreates each still
fi lm frame for high-defi nition picture quality.
NOTE
• This model is not compatible to 1080/24p signal.
w Black
For easier viewing, change the viewing depth by
selecting a level for automatically adjusting the dark
portion of an image.
Selected item
On For high detail in black portions
Off No adjustment
Description
White with bluish tone
White with reddish tone
Description
w 3D-Y/C
Provides high quality images with minimal dot crawl
and cross colour noise.
Selected item
Normal adjustment
Standard
Fast For movie image
Slow For still image
Off 3D-Y/C off
NOTE
• 3D-Y/C is not selectable depending on the input signal
type.
• 3D-Y/C may not operate depending on the input signal
type or noisy input signal.
w Monochrome
For viewing images in monochrome.
Press MENU and the MENU screen displays.
1
Press c / d to select "Picture".
2
Press a / b to select "Advanced", and then
3
press ENTER.
Press a / b to select "Monochrome", and then
4
press ENTER.
Press c / d to select "On", and then press
5
ENTER.
w DNR (Digital Noise Reduction)
Reduces noise on the screen and produces a clear
video image.
Press MENU and the MENU screen displays.
1
Press c / d to select "Picture".
2
Press a / b to select "Advanced", and then
3
press ENTER.
Press a / b to select "DNR", and then press
4
ENTER.
Press a / b to select the desired level, and
5
then press ENTER.
Description
31