Turn signal light bulb, replacing<IXE>
Replacing the tail/brake light
bulb
2
1
ZAUM00**
1. Tail/brake light lens
2. Bulb
1. Remove the tail/brake light lens by
removing the screws.
2. Remove the defective bulb by push-
ing it in and turning it counterclock-
wise.
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screws.
cC
Do not overtighten the screws, other-
PERIODIC MAINTENANCE AND MINOR REPAIR
EAU24131
wise the lens may break.
ECA10680
Replacing a turn signal light
bulb
1. Remove the turn signal light lens
ZAUM00**
1. Turn signal light lens
2. Bulb
6-27
by removing the screw.
2
EAU24202
1
2
3
1
4
5
6
7
8
9