imagistics sx2100 User Manual page 19

or
Press to scroll forward or backward
to a menu selection.
When using the speaker, telephone
handset or ring, you can press these
keys to adjust the volume in fax
mode.
or
Press to scroll through the menus
and options.
Also, you can use these keys to do
a numerical search for the names of
stored numbers in fax mode.
5
Fax and telephone keys:
Monitor
Lets you dial telephone and fax
numbers without lifting the handset.
Resolution
Sets the resolution when you send a
fax.
Search/Speed Dial
Lets you look up numbers that are
stored in the dialing memory. It also
lets you dial stored numbers by
pressing # and a three-digit number.
Redial/Pause
Redials the last number you called.
It also inserts a pause in auto dial
numbers.
6
Start
Lets you start sending faxes,
making copies or scanning.
7
Stop
Stops a fax, copy and scan
operation or exits from the menu.
1 - 5 INTRODUCTION
8
Copy keys
(Temporary settings):
Enlarge/Reduce
Lets you reduce or enlarge copies
depending upon the ratio you
select.
Contrast
Lets you make a copy that is lighter
or darker than the original
document.
Mode
Lets you select the copy quality for
your type of original document.
Options
You can quickly and easily select
temporary settings for copying.
9
Dial Pad
Use these keys to dial telephone or
fax numbers and as a keyboard for
entering information into the
machine.
The # key lets you temporarily
switch the dialing mode during a
telephone call from Pulse to Tone.
0
Shift
To access memory locations 17
through 32 in the One-Touch keys
hold down the Shift key.
A
One-Touch keys
These 16 keys give you instant
access to 32 previously stored auto
dial numbers.