Pc Health Status; Miscellaneous Control - JETWAY PM2M User Manual

CMOS Setup Utility – Copyright(C) 1984-2004 Award Software
IRQ5 assigned to
IRQ7 assigned to
IRQ9 assigned to
IRQ10 assigned to
IRQ11 assigned to
IRQ12 assigned to
IRQ14 assigned to
IRQ15 assigned to
↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values

3-10 PC Health Status

This section shows the Status of you CPU, Fan, Warning for overall system status. This is
only available if there is Hardware Monitor onboard.
CMOS Setup Utility – Copyright(C) 1984-2004 Award Software
Shutdown Temperature
Show PC Health in Post
Vcore
VDIMM 2.5V
+3.3V
+5V
+12V
3VSB
-12V
5VSB
Vbat
CPU Temperature
CPUFAN
SFAN1
SFAN2
↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
Shutdown Temperature
This item can let users setting the Shutdown temperature, when CPU temperature over this
setting the system will auto shutdown to protect CPU.
Show PC Health in Post
During Enabled, it displays information list below. The choice is either Enabled or Disabled
Current CPU Temperature/Current System Temp/Current FAN1, FAN2 Speed/Vcore/
Vdd/3.3V/+5V/+12V/-12V/VBAT(V)/5VSB(V)
This will show the CPU/FAN/System voltage chart and FAN Speed.
Detect CPUFAN in Post
During Enabled, system will warn the user if CPU Fan is not functioning.

3-11 Miscellaneous Control

IRQ Resources
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
F6:Optimized Defaults
PC Health Status
Disabled
Enabled
1.55V
2.64V
3.03V
5.08V
11.96V
3.33V
(-)12.36V
4.91V
3.3V
35 ° C
3010 rpm
0 rpm
0 rpm
F6:Optimized Defaults
32
Item Help
Menu Level >>
F1:General Help
F7:Standard Defaults
Item Help
Menu Level >
F1:General Help
F7:Standard Defaults