3Com TokenLink Velocity TokenLink VelocityTM XL PCI Network Interface Card User Manual page 28

2-4 C 2: I
HAPTER
3 Insert the 3C359 NIC in an empty PCI bus master slot
and secure the mounting screw, as shown in
Figure 2-2.
Make sure the NIC is completely seated in the slot by
pushing down firmly on both ends of the NIC. When the
NIC is correctly seated, the gold connecting fingers inserted
in the slot do not show.
Note the slot number of the NIC. You may need it during
driver installation.
Figure 2-2 Inserting the 3C359 NIC
4 Replace the unit's cover and reconnect any cables that
you may have disconnected from other devices (see
"Safety Precautions").
5 Turn the power on.
When power is turned on, the PCI system automatically
configures the NIC.
3C359 NIC
NSTALLING THE
Mounting screw
32-bit PCI
slots
ISA/EISA
slots