Pioneer DEH-9300SD Operation Manual page 19

Cd rds receiver
Hide thumbs Also See for DEH-9300SD:
Table of Contents

Advertisement

Additional Information
Message
Cause
NO AUDIO
There are no
songs.
The connected
USB storage de-
vice has security
enabled
SKIPPED
The connected
USB storage de-
vice contains
files embedded
with Windows
Mediaä DRM 9/
10
PROTECT
All the files in the
USB storage de-
vice are em-
bedded with
Windows Media
DRM 9/10
NOT COMPA-
The connected
TIBLE
USB storage de-
vice is not sup-
ported by this
unit.
Non-compatible
iPod
Non-compatible
SD storage de-
vice
Action
Transfer the audio
files to the USB
storage device and
connect.
Follow the USB
storage device in-
structions to dis-
able the security.
Play an audio file
not embedded with
Windows Media
DRM 9/10.
Transfer audio files
not embedded with
Windows Media
DRM 9/10 to the
USB storage de-
vice and connect.
! Connect a USB
Mass Storage
Class compliant
device.
! Disconnect your
device and replace
it with a compati-
ble USB storage
device.
Disconnect your
device and replace
it with a compati-
ble iPod.
Remove your de-
vice and replace it
with a compatible
SD storage device.
Message
Cause
CHECK USB
The USB connec-
tor or USB cable
has short-
circuited.
The connected
USB storage de-
vice consumes
more than 500
mA (maximum
allowable cur-
rent).
The iPod oper-
ates correctly but
does not charge
ERROR-19
Communication
failed.
iPod failure
Appendix
Action
Check that the
USB connector or
USB cable is not
caught in some-
thing or damaged.
Disconnect the
USB storage de-
vice and do not
use it. Turn the
ignition switch to
OFF, then to ACC
or ON and then
connect only com-
pliant USB storage
devices.
Make sure the con-
nection cable for
the iPod has not
shorted out (e.g.,
not caught in
metal objects).
After checking,
turn the ignition
switch OFF and
back ON, or dis-
connect the iPod
and reconnect.
! Perform one of
the following op-
erations.
–Turn the ignition
switch OFF and
back ON.
–Disconnect or
eject the external
storage device.
–Change to a dif-
ferent source.
Then, return to the
USB or SD source.
! Disconnect the
cable from the
iPod. Once the
iPod's main menu
is displayed, recon-
nect the iPod and
reset it.
Disconnect the
cable from the
iPod. Once the
iPod's main menu
is displayed, recon-
nect the iPod and
reset it.
19
En

Advertisement

Table of Contents
loading

Table of Contents