Seaming Guide On The Stitch Plate; Reverse Stitching - Baby Lock A-Line Audrey BL67 Manual

reVerSe STiTCHinG

Reverse stitching is used for reinforcing the ends of the seams.
1. Place the fabric in position where back stitching is to be made and lower the presser foot.
2. Press reverse stitch button and sew 4-5 stitches. (If using the foot control, press pedal while pressing
reverse stitch button.)
3. Press start button and resume sewing. (If using the foot control, release reverse stitch button and press
the foot control to sew forward.)
4. When you reach the end of the seam, press the reverse stitch button and sew 4-5 reverse stitches.

SeAMinG GUiDe On THe STiTCH PLATe

The figure on each guide line on the stitch plate indicates the distance between this guide line and the center
needle position. Guide the fabric along the specific guide line in order to get the desired seam allowance
between the stitching and the edge of the fabric.
Starting to Sew
2
3
1
4
8
1/2
5/8
3/4
7/8
10 15 20 25