Connectivity; Sound Blaster Audigy 2 Card - Creative Sound Blaster Audigy2 Platinum User Manual

Creative Multi Speaker
Surround (CMSS)
SB1394 /FireWire
TM
Compatibility

Connectivity

Sound Blaster
Audigy 2 card
Audio Inputs
Audio Outputs
❑ Multispeaker technology
❑ Upmixes mono or stereo sources to 6.1 channels
❑ Professional-quality panning and mixing algorithm
❑ Compliant to IEEE 1394a specification
❑ Supports data rates of 100, 200, and 400 Mbps
❑ Supports up to 63 IEEE 1394 compatible devices in a daisy-chain configuration
❑ Supplies up to 3 watts to IEEE 1394 compatible devices
❑ One line-level analog Line input via stereo jack on rear bracket
❑ One mono Microphone analog input via stereo jack on rear bracket
❑ CD_IN line-level analog input via 4-pin Molex connector on card
❑ AUX_IN line-level analog input via 4-pin Molex connector on card
❑ TAD line-level analog input via 4-pin Molex connector on card
❑ CD_SPDIF digital input via 2-pin Molex connector on card
❑ ANALOG/DIGITAL OUT via 4-pole 3.5 mm minijack on rear bracket
• ANALOG OUT: Centre and Subwoofer channels
• DIGITAL OUT: Front, Rear, Centre and Subwoofer SPDIF digital outputs
❑ Three line-level analog outputs via 3.5 mm minijacks on rear bracket: front, rear, and rear centre/
centre/subwoofer Line-Outs 1, 2 and 3
❑ Stereo headphone (32-ohm load) support on Front Line-Out
General Specifications A-3