Step 4: Install the
Sound Blaster
Audigy 2 card
Do not force the audio card into
the slot. Make sure that the gold
finger PCI connector on the
Sound Blaster Audigy 2 card is
aligned with the PCI bus
connector on the motherboard
before you insert the card into
the PCI expansion slot.
If it does not fit properly, gently
.
remove it and try again
1. Align the Sound Blaster Audigy 2 card with the PCI slot and press the card gently but firmly into the
slot as shown in Figure 1-11.
Figure 1-11: Securing the audio card to the expansion slot.
2. Secure the card with a screw if necessary.
2
1
Installing Hardware 1-17